- The whole steel plate of CNC hydraulic press brake is welded and the stress is eliminated by the vibration after tempering sandblasted and sprayed with anti-rust paint.
- The machine frame is processed by imported CNC three-dimensional processing center, which ensures the parallelism and verticality of each installation.
- The CNC hydraulic press brake machine has good rigidity and stability.
- Adopt Hydraulic transmission to ensure stable and reliable operation.
- Use electro hydraulic servo system, full closed loop feedback control synchronization.
- Bending machine throat deformation prevention system to ensure the accuracy of bending.
Advantages and differences:
- Higher precision and higher efficient than Torsion bar synchronous press brake
- Multi-axis available: 4 axis, 5 axis, 6 axis, 7 axis, 8 axis
- CNC crowning: Mechanical or hydraulic table crowning.
- Upper punch compensation.
- Back gauge controlled by computer system, able to bend complex workpiece
- Adjustable bending speed with fastest speed of 180-200mm/s.
- Famous European brands controller available: DELEM, CYBLEC, ESA, ELGO
- With more than 6 axis, electro-hydraulic can be connected to ROBOT
CNC Press Brake Standard Components:
- ESA S530 CNC control unit with 2D graphics
- 4+1 axis CNC
- Y1, Y2 precision ram positioning
- Standard X and R-axis
- CNC dynamic crowning
- Large open height/ stroke/ throat depth
- Double section arm NOK seal ring
- Schneider and ABB Electric Components
- High Siemens efficiency motor
- Stand By Function for energy-saving drive
- Rear cover: Safety barriers (Category IV)
- Sheet metal frontal supports
- SUNNY Pump
- ABBA Ball screw and linear guide
- Rear stop fingers 3 pieces and double linear guide
Applications:
All factories need to use press brake can choose Electro-Hydraulic CNC Press Brake.
For different kinds of sheet metal bending process.
- Decoration industry: chassis, cabinets, elevator, doors and windows, curtain wall, etc.
- Construction industry: steel structure, , tower, bridge, etc.
- Mechanical equipment manufacturing: environmental protection equipment, animal husbandry equipment, solar energy equipment, heat insulator, transformer, etc.
- Electric appliance and power industry: electric pole, lamp pole, electrical equipment, electronic device, etc.
- Automobile and ship industry
- Aerospace Industry
ELGO Magnetic Railing Ruler
Magnetic railing ruler connects with computer control system, ratio valve and oil cylinder form a close loop to operate the press brake.
The high accuracy guiding system can resist oil pollution, measure severe environmental, position measurement system and hydraulic balance function, which can meet the needs of full length or eccentricity.
Press Brake Clamp
Standard configuration of clamp for CNC press brake is mechanical clamp
Fast and Easy to change tooling
Secure against tools falling down
Front Support Robot
Adjustable front sheet-support along with the linear guide, which can move up/down/left/right.
The front support is a standard configuration of the CNC hydraulic press brake machine for an operation to fix and support the steel plate more conveniently.
Ball screw & Double Linear guide & Beam & Block Finger
SHENCHONG adopts ABBA ball screw and double linear guide, which can maximum to ensure the accuracy and straightness.
Back gauge block finger: could upturn, with back and forth fine adjustment function.
Beam: precision machining, ensure the precision of arbitrary position.
Double Hoist Arm
ESA S520 Italian Double hoist arm can move 360° which is more flexible and convenient for people to operate computers.
SHENCHONG CNC hydraulic Press Brake adopts a double hoist arm for better user experience.
SIEMENS Motor
The electric motor is specially designed for the European market, whose terminal box is located on the top. This motor has a very compact structure and attractive appearance.
The sizes and mounting dimensions are produced according to the IEC standard. The motor has some good features, such as high efficiency, energy-saving, high starting torque and easy maintenance.
Argo Hytos Valve
Argo hytos valve from German: argo hutos valve block can be disassembled to repair.
Upper and Lower Dies
The Universal Multi V Upper and Lowers Dies for CNC press brake can customize based on your requests.
CNC press brake tooling die Material: 42CrMo
CNC Press Brake Control System
ESA S630
ESA S630 control system is the most powerful in S 600 series. With 10” touch screen with powerful graphic, all the performances of a high-level CNC is in an economical and user-friendly controller. ESA S630 High-level graphic programming for easiness of use and sophisticated algorithms can make the full use of your bending machines. It can directly manage any kind of servo valves with no need of external amplifiers and Manage up to four axes in any combination, including electrical press brakes and Tandem press brakes.
ESA S640
ESA S640 control system is compact with high performances. It has top-level performances for plate bending machines up to 6 axes. With 15” touch screen wide, it allows excellent comfort for the operator enhancing the advantages of a full graphic interface. Automatic bending sequence calculations and Material Data Base for predictive compensation are available (as options) to reduce the wastage of material. Crowning correction in degrees and dynamic crowning is available to grant the perfect bend linearity.
ESA 650 W
ESA 650W uses versatile Pc, gorgeous 15” 4:3 high-resolution touch screen with no limit in both performances and flexibility. The powerful built-in Pc allows having on the machine a real 3D cad cam (metallix, radan, esa). It has the function of finger-tip work piece design and direct import of tools shapes (.dxf files), and management of tool library. Angle measurement and correction with all existing devices is available.
DA-58T
DA-58T is a state-of-the-art complete 2D graphical control solution for synchronized press brakes.
It’s the easiest CNC programming based on the Delem graphical touch screen user interface including automatic bend sequence calculation and collision detection. It uses 15″ high resolution color TFT with industrial grade multi touch screen technology. Highly effective control algorithms optimize the machine cycle and minimize set-up time. DA-58T can provide a modern compact and versatile solution for powerful economic press brake applications.
DA66T
DA66T is for high-end press brake control solutions. The new generation DA-Touch controls offer an even higher grade of efficiency in programming, operation and control of press brakes. It uses combined with state-of-the-art technology go hand in hand to improve productivity. The touch screen gives access to the proven Delem user-interface and enables direct navigation between programming and production. Bending machine adjustment and test bends are reduced to a minimum with a quick and easy program-to-production work sequence.
DA-69T
DA-69T is DA-Touch 3D modular press brake control system for state-of-the-art flexible solutions. The DA-69T offers 2D as well as 3D programming that includes automatic bend sequence calculation and collision detection. This is full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling.
Cybelec Touch 12 PS
Cyb Touch 12 PS is specially customized for electro-hydraulic CNC press brake machine. It Opens to users with simple and intuitive full touch screen programming. Cybelec Touch 12 control system has modern and efficient hand drawing part profile programming and fast solution provided by 2D graphic display and automatic bending sequence.
ModEva Pac
Modeva PAC can control electro-hydraulic CNC press brake machine or torsion bar NC hydraulic press brake machine. The number of control axes reaches 4 or 7. It adopt 15 “color LCD touch screen with intuitive touch screen interface. It is applicable to all kinds of CNC hydraulic press brakes.
VT19
VT19 is a 2D graphic programming bending machine CNC system. It can control not only ordinary CNC hydraulic press brake, but also high-end CNC press brake with more than 20 axes. It uses 19″ streamlined glass touch screen simple and friendly man-machine interface With efficient 2D graphics drawing, it can do fast and accurate 2D programming.
| Model | Normal Pressure (kn) | Length of Table (mm) | Distance Between Housing (mm) | Throat Depth (mm) | Stroke (mm) | Open Height (mm) | Main motor (Kwan) | Overall Dimension (L×W×H) (mm) |
| 63T/2500 | 630 | 2500 | 2000 | 320 | 160 | 400 | 5.5 | 3040*1640*2225 |
| 63T/3200 | 630 | 3200 | 2660 | 320 | 160 | 400 | 5.5 | 3710x1650x2450 |
| 80T/2500 | 800 | 2500 | 2000 | 400 | 160 | 410 | 7.5 | 3050*1650*2305 |
| 80T/3200 | 800 | 3200 | 2660 | 400 | 160 | 410 | 7.5 | 3710*1650*2405 |
| 100T/2500 | 1000 | 2500 | 2000 | 400 | 200 | 450 | 7.5 | 3060*1690*2425 |
| 100T/3200 | 1000 | 3200 | 2660 | 400 | 200 | 450 | 7.5 | 3720*1690*2475 |
| 100T/4000 | 1000 | 4000 | 3200 | 400 | 200 | 450 | 7.5 | 4500*1690*2545 |
| 125T/2500 | 1250 | 2500 | 2000 | 400 | 200 | 450 | 11 | 3080*1760*2500 |
| 125T/3200 | 1250 | 3200 | 2660 | 400 | 200 | 450 | 11 | 3740*1760*2535 |
| 125T/4000 | 1250 | 4000 | 3200 | 400 | 200 | 450 | 11 | 4520*1760*2610 |
| 125T/6000 | 1250 | 6000 | 4800 | 400 | 200 | 450 | 11 | 6100*1500*2895 |
| 160T/2500 | 1600 | 2500 | 2000 | 400 | 200 | 470 | 11 | 3100*1830*2520 |
| 160T/3200 | 1600 | 3200 | 2660 | 400 | 200 | 470 | 11 | 3760*1830*2620 |
| 160T/4000 | 1600 | 4000 | 3200 | 400 | 200 | 470 | 11 | 4540*1830*2720 |
| 160T/6000 | 1600 | 6000 | 4800 | 400 | 200 | 470 | 11 | 6100*1570*3000 |
| 200T/3200 | 2000 | 3200 | 2660 | 400 | 200 | 470 | 11 | 3760*1880*2670 |
| 200T/4000 | 2000 | 4000 | 3200 | 400 | 200 | 470 | 11 | 4540*1880*2770 |
| 200T/6000 | 2000 | 6000 | 4800 | 400 | 200 | 470 | 11 | 6080x1950x2900 |
| 250T/3200 | 2500 | 3200 | 2660 | 400 | 250 | 490 | 15 | 3780*1980*2860 |
| 250T/4000 | 2500 | 4000 | 3200 | 400 | 250 | 490 | 15 | 4560x1980x2960 |
| 250T/5000 | 2500 | 5000 | 4000 | 400 | 250 | 490 | 15 | 5080x2100x3250 |
| 250T/6000 | 2500 | 6000 | 4800 | 400 | 250 | 490 | 15 | 6080x2200x3400 |
| 300T/3200 | 3000 | 3200 | 2660 | 400 | 250 | 500 | 22 | 3800*2080*3090 |
| 300T/4000 | 3000 | 4000 | 3200 | 400 | 250 | 500 | 22 | 4580*2080*3090 |
| 300T/5000 | 3000 | 5000 | 4000 | 400 | 250 | 500 | 22 | 5100x2200x3300 |
| 300T/6000 | 3000 | 6000 | 4800 | 400 | 250 | 500 | 22 | 6600*2250*3500 |
| 400T/4000 | 4000 | 4000 | 3200 | 400 | 300 | 605 | 30 | 4580*2460*3600 |
| 400T/5000 | 4000 | 5000 | 4000 | 400 | 300 | 605 | 30 | 5600*2460*3750 |
| 400T/6000 | 4000 | 6000 | 4800 | 400 | 300 | 605 | 30 | 6200x2650x4000 |
| 500T/4000 | 5000 | 4000 | 3200 | 600 | 300 | 615 | 37 | 4200x2800x4100 |
| 500T/5000 | 5000 | 5000 | 4000 | 600 | 300 | 615 | 37 | 5200x2800x4200 |
| 500T/6000 | 5000 | 6000 | 4800 | 600 | 300 | 615 | 37 | 6200x2800x4300 |
| 600T/5000 | 6000 | 5000 | 4000 | 600 | 300 | 650 | 37 | 5200x3000x4400 |
| 600T/6000 | 6000 | 6000 | 4800 | 600 | 300 | 650 | 37 | 6200x3000x5400 |
| 800T/5000 | 8000 | 5000 | 4000 | 700 | 350 | 710 | 55 | 5200*3500*5600 |
| 800T/6000 | 8000 | 6000 | 4800 | 700 | 350 | 710 | 55 | 6200*3500*5800 |
| 1000T/6000 | 10000 | 5000 | 4800 | 700 | 350 | 730 | 55 | 6200*4100*6900 |
