NC torsion bar synchrony hydraulic press brake is good for bending sheet metal plate in the factories.
WC67K Hydraulic NC Press Brake
The entire machine is in fully steel welded structure with stress eliminated by vibration aging technology. The machine mainly consists of the left and right wall boards, working table, oil box, slot steel, synchronizing shaft, sliding block, etc.
It enjoys high accuracy and high strength and can be transported easily. Machine tool have the function of point move, single and continuous, fast and slow area distinguishing slider. Area can be adjusted independently.
HYDRAULIC SYSTEM
The hydraulic press brake adopts integrated hydraulic control system which limits the quantity of pipe connections, thus being more reliable and easy for maintenance.
SNYCHRO CONTROL SYSTEM
It also adopts steel torsion bar synchro system with very simple structure but very high accuracy. At both ends of the sliding block, there are 2 synchro folks which make the sliding block movement always parallel to working table. This structure highlights a balanced movement effect during operation. Upper die compensation is used to improve the brake precision.
Advantages and differences:
- Traditional structure by using the torsion bar synchronize Y axis
- Standard 3 axis X, Y, R.
- Standard DELEM DA41 controller.
- Ball screw and linear guide.
- Backgauge controlled by servo motor.
- Standard Lion light curtain protection.
- Upper punch compensation.
Hydraulic Press Brake Standard Components
- ESTUN 21 NC Control Unit
- FIRST Valves (U.S.A)
- Full length multi V die series of 835mm punches with a fractioned on
- NOK Seal Ring Side and Back
- Protection Device
- X,Y-Axis Servo Motorized Back Gauge
- High Speed Servo Back Gauge
- Mechanical crowning system managed by Manual
- SHENCHONG Top & Bottom Tool Clamps
- Electrical cabinet with Electrical cabinet with Telemecanique Schneider, Esautomotion, ABB components
Applications:
It is a cost effective choice in steel structure industry, rough machining factories, truck manufacturing industry etc…
Due to the structure limitation, Wuxi SHENCHONG does not recommend customer to choose torsion bar synchronous press brake when they buy model above 400tons.

Advanced Snychro Control System
Shenchong synchronize torsion bar is two times larger than normal torsion bar, which improve the torsion resistance.
Double hydraulic oil cylinders are applied for upper transmission, provided with mechanical limit stopper and synchronize torsion bar, typical of stable and reliable operation, as well as high precision.
Eccentric shaft can adjust Y axis and X axis of the snychro torsion bar to ensure the torsion bar can perform fine when out of sync.

Press Brake Backguage
Beam at the back of the slider to adjust the slider X axis straightness
Adjustable template at the bottom of the slider, forecast to adjust the Y axis straightness after deformation
Electric back gauge mechanism has two function of electric and manual adjustment, and the digital display shows back gauge stroke data
Back gauge beam can be adjusted up and down as a whole
Back gauge finger moves around any error within 0.2 mm, and can do positioning adjustment alone.

Electric Cabinet and Components
All press brakes from Wuxi Shenchong includes both NC Torsion Bar Synchro press brake and CNC press brake adopt Schneider electrical components: high quality electric parts can perform well even the electricity is not stable and customers can easily get the replacement any where in the world.
Also, the electric cabinet with ABB Door Open Power Off Component to ensure the operating safety.
CNC Press Brake Control System

ESA S630
ESA S630 control system is the most powerful in S 600 series. With 10” touch screen with powerful graphic, all the performances of a high-level CNC is in an economical and user-friendly controller. ESA S630 High-level graphic programming for easiness of use and sophisticated algorithms can make the full use of your bending machines. It can directly manage any kind of servo valves with no need of external amplifiers and Manage up to four axes in any combination, including electrical press brakes and Tandem press brakes.

ESA S640
ESA S640 control system is compact with high performances. It has top-level performances for plate bending machines up to 6 axes. With 15” touch screen wide, it allows excellent comfort for the operator enhancing the advantages of a full graphic interface. Automatic bending sequence calculations and Material Data Base for predictive compensation are available (as options) to reduce the wastage of material. Crowning correction in degrees and dynamic crowning is available to grant the perfect bend linearity.

ESA 650 W
ESA 650W uses versatile Pc, gorgeous 15” 4:3 high-resolution touch screen with no limit in both performances and flexibility. The powerful built-in Pc allows having on the machine a real 3D cad cam (metallix, radan, esa). It has the function of finger-tip work piece design and direct import of tools shapes (.dxf files), and management of tool library. Angle measurement and correction with all existing devices is available.

DA-58T
DA-58T is a state-of-the-art complete 2D graphical control solution for synchronized press brakes.
It’s the easiest CNC programming based on the Delem graphical touch screen user interface including automatic bend sequence calculation and collision detection. It uses 15″ high resolution color TFT with industrial grade multi touch screen technology. Highly effective control algorithms optimize the machine cycle and minimize set-up time. DA-58T can provide a modern compact and versatile solution for powerful economic press brake applications.

DA66T
DA66T is for high-end press brake control solutions. The new generation DA-Touch controls offer an even higher grade of efficiency in programming, operation and control of press brakes. It uses combined with state-of-the-art technology go hand in hand to improve productivity. The touch screen gives access to the proven Delem user-interface and enables direct navigation between programming and production. Bending machine adjustment and test bends are reduced to a minimum with a quick and easy program-to-production work sequence.

DA-69T
DA-69T is DA-Touch 3D modular press brake control system for state-of-the-art flexible solutions. The DA-69T offers 2D as well as 3D programming that includes automatic bend sequence calculation and collision detection. This is full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling.

Cybelec Touch 12 PS
Cyb Touch 12 PS is specially customized for electro-hydraulic CNC press brake machine. It Opens to users with simple and intuitive full touch screen programming. Cybelec Touch 12 control system has modern and efficient hand drawing part profile programming and fast solution provided by 2D graphic display and automatic bending sequence.

ModEva Pac
Modeva PAC can control electro-hydraulic CNC press brake machine or torsion bar NC hydraulic press brake machine. The number of control axes reaches 4 or 7. It adopt 15 “color LCD touch screen with intuitive touch screen interface. It is applicable to all kinds of CNC hydraulic press brakes.

VT19
VT19 is a 2D graphic programming bending machine CNC system. It can control not only ordinary CNC hydraulic press brake, but also high-end CNC press brake with more than 20 axes. It uses 19″ streamlined glass touch screen simple and friendly man-machine interface With efficient 2D graphics drawing, it can do fast and accurate 2D programming.
Model | Normal Pressure (kn) | Length of Table (mm) | Distance Between Housing (mm) | Throat Depth (mm) | Stroke (mm) | Open Height (mm) | Main motor (Kwan) | Overall Dimension
(L×W×H) (mm) |
Gross Weight Outline (ton) |
63/2500 | 630 | 2500 | 2000 | 250 | 105 | 345 | 5.5 | 2600x1350x2180 | 4.5 |
100/3200 | 1000 | 3200 | 2600 | 320 | 145 | 395 | 7.5 | 3300x1500x2355 | 7.2 |
125/3200 | 1250 | 3200 | 2600 | 320 | 145 | 405 | 7.5 | 3300x1570x2470 | 8.2 |
125/4000 | 1250 | 4000 | 3200 | 400 | 145 | 405 | 7.5 | 4100x1570x2520 | 9.2 |
125/5000 | 1250 | 5000 | 3800 | 320 | 145 | 405 | 7.5 | 5100x1570x2700 | 11.5 |
125/6000 | 1250 | 6000 | 4500 | 320 | 145 | 405 | 7.5 | 6100x1570x2800 | 14.5 |
160/3200 | 1600 | 3200 | 2500 | 320 | 145 | 415 | 11 | 3300x1600x2525 | 11 |
160/4000 | 1600 | 4000 | 3000 | 320 | 145 | 415 | 11 | 4100x1600x2595 | 12.8 |
160/5000 | 1600 | 5000 | 3800 | 320 | 145 | 415 | 11 | 5100x1600x2900 | 16.5 |
160/6000 | 1600 | 6000 | 4500 | 320 | 145 | 415 | 11 | 6100x1600x3000 | 18.8 |
200/3200 | 2000 | 3200 | 2500 | 320 | 145 | 420 | 11 | 3300x1800x2685 | 12.5 |
200/4000 | 2000 | 4000 | 3000 | 320 | 145 | 420 | 11 | 4100x1800x2775 | 14.2 |
200/5000 | 2000 | 5000 | 3800 | 320 | 145 | 420 | 11 | 5100x1800x3050 | 19 |
200/6000 | 2000 | 6000 | 4500 | 320 | 145 | 420 | 11 | 6100x1800x3150 | 22 |
200/3200 | 2500 | 3200 | 2200 | 400 | 195 | 430 | 15 | 3300x1890x2875 | 14 |
250/4000 | 2500 | 4000 | 3000 | 400 | 195 | 435 | 15 | 4100x1890x2920 | 16 |
250/5000 | 2500 | 5000 | 3800 | 400 | 195 | 435 | 15 | 5100x1890x3200 | 22 |
250/6000 | 2500 | 6000 | 4500 | 400 | 195 | 435 | 15 | 6100x1890x3320 | 26 |
300/3200 | 3000 | 3200 | 2200 | 400 | 245 | 490 | 22 | 3300x2150x3160 | 18 |
300/4000 | 3000 | 4000 | 2800 | 400 | 245 | 490 | 22 | 4100x2150x3200 | 20.5 |
300/5000 | 3000 | 5000 | 3800 | 400 | 245 | 490 | 22 | 5100x2150x3350 | 25 |
300/6000 | 3000 | 6000 | 4500 | 400 | 245 | 490 | 22 | 6100x2150x3500 | 29 |
400/4000 | 4000 | 4000 | 2800 | 400 | 245 | 495 | 30 | 4100x2310x3500 | 28 |
400/5000 | 4000 | 5000 | 3800 | 400 | 245 | 495 | 30 | 5100x2310x3620 | 33 |
400/6000 | 4000 | 6000 | 4500 | 400 | 245 | 495 | 30 | 6100x2310x3750 | 38 |
500/4000 | 5000 | 4000 | 2800 | 500 | 245 | 505 | 37 | 4100x2450x3650 | 34 |