With the development of press brake in recent years, various CNC systems have appeared on the market, such as:
– CYBELEC system from Switzerland
– ELGO system from Germany
– DELEM system from Netherlands
– ESA system from Italy
– MD system from Hong Kong, China
– SNC system from Nanjing, China……
Among so many press brake CNC controllers, ESA system has high cost performance. The purpose of this article is to introduce Italy’s ESA system to you.
Brief Introduction of ESA CNC Control System
Based on more than 18 years of sales experience and users’ feedback, ESA press brake CNC systems are more cost-effective and practical.
– ESA system is the system that common press brake has been equipped with all the time.
– This is also the standard configuration of Shenchong CNC press brake WEK. So we have a relatively good understanding of it.
– The 530, 540, 550 and 560 of ESA system are all keypad versions. And their corresponding 630, 640, 650 and 660 are all touch-screen versions.
The most commonly used button version is ESA530 system equipped with a 10 inch screen.
It can be programmed for three pages with graphics, but cannot be programmed automatically.
The ESA530 press brake CNC system can also be double-machine linkage. It means that tandem CNC press brake can also use it.
Touch Screen Version – ESA 630 and ESA 640 Press Brake CNC Control System
The touch screen versions most commonly used are the ESA630 and ESA640 CNC press brake system.
– ESA630 system standard configuration is 4 axis, at most 4 axis in the meantime.
– The 4 axis can control the up and down movement of the slider, the back and forth movement of press brake back gauge and the up and down movement of the back gauge.
– ESA630 is equipped with a 10 inch touch screen, which can be used for digital programming, graphic programming, automatic programming, automatic optimization, or dual-machine linkage.
– The standard configuration of ESA640 is 4 axis, and up to 6 axis can be configured.
– The additional 2 axes are used to control the left and right movement of the press brake CNC back gauge.
– The 6 axis press brake CNC is more suitable for the processing of complex workpiece.
– Besides, the ESA640 with a 15 inch touch screen can be used for 3D display, 2D programming, or programming with a computer.
– The ESA640 can also achieve three-machine linkage.
Advice:
If a customer asks for an inquiry, saying that they want a hydraulic press brake CNC of 125 tons and 3200mm, and the bending workpiece is relatively complex, we will recommend the ESA640 CNC system of Italian ESA series to him.
Intelligence and automation is a major trend in the development of cnc bending machine. As a result, the press brake control system is more and more advanced and diverse.
You can choose the press brake CNC system relying on your own actual situation and preferences.
As a high-tech product, we do not recommend users to carry out ESA press brake CNC retrofit at will. Please use the press brake CNC system according to the manual.